diff --git a/arch/arm/dts/fsl-ls1088a-qds.dtsi b/arch/arm/dts/fsl-ls1088a-qds.dtsi
new file mode 100644
index 0000000..a7d0edc
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1088a-qds.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1088a QDS common board device tree source
+ *
+ * Copyright 2017-2020 NXP
+ */
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+
+	fpga@66 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-mfd";
+		reg = <0x66>;
+
+		mux-mdio@54 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mdio-mux-i2creg";
+			reg = <0x54>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xe0>; // reg 0x54, bits 7:5
+			mdio-parent-bus = <&emdio1>;
+
+			mdio@00 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x00>;
+
+				rgmii_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+			mdio@20 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x20>;
+
+				rgmii_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+			};
+
+			emdio1_slot1: mdio@40 { /* I/O Slot #1 */
+				reg = <0x40>;
+				device-name = "emdio1_slot1";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			emdio1_slot3: mdio@60 { /* I/O Slot #3 */
+				reg = <0x60>;
+				device-name = "emdio1_slot3";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "pcf2127-rtc";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0 0 0x5 0x80000000 0x08000000
+			2 0 0x5 0x30000000 0x00010000
+			3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus", "fsl,ls1088aqds-fpga",
+				"fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+	 };
+};
+
+&sata {
+	status = "okay";
+};